RSS feed



All Publications

Total Publications = 115

1 Junaid Abbasi, Mirza Jahanzaib, Muhammad Azam, Ahmad Wasim, Salman Hussain, Musharraf Abbas, Effects Of Wire-Cut EDM Process Parameters on Surface Roughness of HSLA Steel, International Journal of Advanced Manufacturig Technology, (2016), pp. 1-12
2 Usama Qazi, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, An institutional framework for the development of sustainable and competitive power market in Pakistan, Renewable and Sustainable Energy Reviews, Vol. 70, (2017), pp. 83–95
3 Shoaib Sarfraz, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, Haris Aziz, Investigating the effects of as-casted and in situ heat-treated squeeze casting of Al-3.5 % Cu alloy, International Journal of Advanced Manufacturig Technology, (2016), pp. 1-15
4 Mirza Jahanzaib, Salman Hussain, Ahmad Wasim, Haris Aziz, Adnan Mirza, Saif Ullah, Modeling of Weld Bead Geometry on HSLA Steel using Response Surface Methodology, The International Journal of Advanced Manufacturing Technology, (2016), pp. 1-12
5 Muhammad Azam, Mirza Jahanzaib, Junaid Ali Abbasi, Ahmad Wasim, Modeling of cutting speed (CS) for HSLA steel in wire electrical discharge machining (WEDM) using moly wire, Journal Journal of the Chinese Institute of Engineers, Vol. 39, No. 7, (2016), pp. 802-808
6 Wasif Safeen, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Haris Aziz, Hassan Abdalla, Predicting the tensile strength, impact toughness, and hardness of friction stir-welded AA6061-T6 using response surface methodology, The International Journal of Advanced Manufacturing Technology, Vol. 87, No. 5, (2016), pp. 1765-1781
7 Muhammad Azam, Mirza Jahanzaib, Junaid Ali Abbasi, Musharaf Abbas, Ahmad Wasim, Salman Hussain, Effects of wire-Cut EDM process parameters on surface roughness of HSLA steel, The International Journal of Advanced Manufacturing Technology, (2016), pp. 1-12
8 Neelum, Haris Aziz, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, Integration of cell formation and job sequencing to minimize energy consumption with minimum make-span, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, (2016), pp.
9 Muhammad Azam, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, Surface Roughness Modeling using RSM for HSLA Steel by Coated Carbide Tools, The International Journal of Advanced Manufacturing Technology, Vol. 78, No. 5, (2015), pp. 1031-1041
10 Haider Aftab, Mirza Jahanzaib, Ahmad Wasim, Lean Capacity Planning for Tool Room: An Iterative System Improvement Approach, Advances in Production Engineering & Management (APEM), Vol. 10, No. 4, (2015), pp. 169-181
11 Abaid Ullah, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Usage and Impacts of speed Humps on Vehicles: A Review, Journal of Advanced Reviews on Scientific Research, Vol. 8, No. 1, (2016), pp. 1-17
12 Javed Iqbal Khan, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, Role of Organisational Behaviour (OB) to Enhance Productivity in a Public Sector Enterprise, Journal of Advanced Research in Business and Management Studies, Vol. 3, No. 1, (2016), pp. 11-25
13 Aruba Waqar, Ahmad Wasim, Salman Hussain, Mirza Jahanzaib, Haris Aziz, Environmental Management System Framework for Sustainability Achievement in Higher Educational Institutions, Journal of Advanced Research in Business and Management Studies, Vol. 3, No. 1, (2016), pp. 47-70
14 Mirza Jahanzaib, Madiha Idrees, Ahmad Wasim, Salman Hussain, Haris Aziz, A Framework for Implementing Quality Function Deployment (QFD) For Utility Services, IOSR Journal of Business and Management (IOSR-JBM), Vol. 18, No. 4, (2016), pp. 92-99
15 Muhammd Irshad Yehya, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Hassan Abdalla, A Cost Effective and Light Weight Unipolar Electroadhesion Pad Technology for Adhesion Mechanism of Wall Climbing Robot, International Journal of Robotics and Mechatronics, Vol. 2, No. 1, (2015), pp.
16 Muhammad Bilal Ahmed, Muhammad Bilal Awan, Ahmad Wasim, Application for Lean Enablers to Support Product Design and Development, International Journal of Mechanical and Industrial Technology, Vol. 2, No. 2, (2014), pp. 16-24
17 Muhammad Bilal Ahmed, Ahmad Wasim, Lean Enablers for Product Design and Development, International Journal for Scientific Research & Development, Vol. 3, No. 2, (2015), pp. 203-208
18 Muhammad Ashraf, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, Production Planning and Control of Assembly Process for the High Tech Products, Technical Journal University of Engineering and Technology Taxila, Vol. 19, No. 1, (2014), pp. 51-61
19 Tahir Iqbal, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, An Integrated Approach of Value Stream Mapping and Simulation for Process Improvements, Technical Journal University of Engineering and Technology Taxila, Vol. 20, No. 2, (2015), pp. 36-44
20 Rizwan Anwar, Mirza Jahanzaib, Ghulam Asghar, Ahmad Wasim, Salman Hussain, Optimization of Surface Roughness for Al-Alloy 7075-T in Milling Process, Technical Journal University of Engineering and Technology Taxila, Vol. 20, No. 2, (2015), pp. 153-159
21 Zeeshan Farrukh , Salman Hussain , Mirza Jahanzaib, Ahmad Wasim, Haris Aziz, A Simple Multi-Criteria Inventory Classification Approach, Technical Journal University of Engineering and Technology Taxila, Vol. 20, No. 4, (2015), pp. 70-78
22 Zubair Iqbal, Hafiz Muhammad Khurram Ali, Ahmad Wasim, Salman Hussain, Mirza Jahanzaib, Evaluating Suppliers’ Efficiency using Conjoint Analysis, The Nucleus, Vol. 53, No. 2, (2016), pp. 121-127
23 Zain ul Abidin, Hafiz Muhammad Khurram Ali, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Supplier Selection in an Industry of Short Lifecycle Products Using Bayesian Network Analysis, Pakistan Journal of Science, Vol. 68, No. 2, (2016), pp. 157-163
24 Hafiz Muhammad Khurram Ali, Muhammad Umer Farooq, Ahmad Wasim, Mirza Jahanzaib, Salman Hussain, Leverage of Office Automation in a Public Sector Engineering Organization: Pre and Post Implementation Analysis, Pakistan Journal of Science, Vol. 68, No. 2, (2016), pp. 168-175
25 Imran Masood, Mirza Jahanzaib, Ahmad Wasim, Sustainability Assessment for dry, Conventional and Cryogenic Machining in Face Milling of Ti-6Al-4V, Quaid-e-awam university research journal of engineering, science & technology, (2016), pp.
26 Bilal Asghar, Ahmad Wasim, Mirza Jahanzaib, Salman Hussain, Impact of Privatization on Employee Relations at Pakistan Telecommunication Company Limited., Nucleus, Vol. 53, No. 4, (2016), pp. 243-253
27 Uzam Hameed, Zailin Guan, Ghulam Zakria, Ahmad Wasim, Muhammad Baqar Raza, Reverse Logistics, a tool for organizational excellence: a Pakistani Perspective, Technical Journal University of Engineering and Technology Taxila, Vol. 21, No. 3, (2016), pp. 78-83
28 Tooba Sikander, Haris Aziz, Ahmad Wasim, Salman Hussain, Mirza Jahanzaib, Continuous Quality Improvement (CQI) Framework: A Case of Industrial Engineering Department, International Journal of Cognitive Research in Science, Engineering and Education (IJCRSEE), Vol. 5, No. 1, (2017), pp.
29 Ahmed Bilal, Ahmad Wasim, Knowledge Based Engineering Tool for Lean Product Design and Development, TheIRES 6th International Conference, Melbourne, Australia, (2015), pp. ,
30 Ahmed Bilal, Ahmad Wasim, Knowledge Based Engineering Tool for Lean Product Design and Development, TheIRES 6th International Conference, Melbourne, Australia, (2015), pp. ,
31 Ahmad Wasim, Ahmad Farhan, Essam Shehab, Ahmed Al-Ashaab, HAssan Abdalla, Set based concurrent engineering awareness and applications assessment for pakistani telecom industries, Proceedings of the13th International Conference on Manufacturing Research (ICMR2015), University of Bath, United Kingdom, (2015), pp. ,
32 Abid Ali, Rafi Javed Qureshi, Mirza Jahanzaib, "Performance Improvement of Flexible Manufacturing System: A Case Study", Research Journal of Science and IT Management, (2013), pp. pp. 7-17
33 Ali Rizwan, Muhammad Abbas Choudhary, Mirza Jahanzaib, Ai Imran, Umair Manzoor, Ammar Ali, Anaysis of factors affecting the stress level of Engineering Students from Remote Areas, International Journal of Engineering Education, Vol. 29, No. 4, (2013), pp. 926-932
34 Abid Ali, Rafi Javed Qureshi, Mirza Jahanzaib, Performance Improvement of Flexible Manufacturing System: A Case Study, Research Journal of Science and IT Management, Vol. 2, No. 6, (2013), pp. 7-17
35 16. Z.U. HASSAN, M.M.I. HAMMOUDA, S. KHUSHNOOD, K. AKHTAR, M. JAHANZEB, A. MALIK, Experimental and Numerical Analysis of Fretting Fatigue Crack Initiation in Dovetail Joint for Aero Engine Compressor, The Nucleus, Vol. 49, No. 4, (2012), pp. 255-264
36 Muhammad Khurram Ali, Rafi Javed Qureshi, Shahab Khushnood, Mirza Jahanzaib, Analytical Hierarchy Process(AHP) based Decision Support Sytem in Global Cement Plant Location; A case study, in Proceedings of the 1st IEEE International Conference on Engineering Management (ICEM-2012),, NUST College of E&ME;, Rawalpindi, Pakistan, (2012), pp. ,
37 Mirza Jahanzaib, Syed Athar Masood, Khalid Akhtar, A Study for Analyzing Effects of Design Parameters in the Sand Casting Process of Aluminum Alloy, LSJ Acta Zhengzhou University Oversea Version, Vol. 9, No. 4, (2012), pp. 891-898
38 Syed Athar Masood, Mirza Jahanzaib, Khalid Akhtar, Do actions speak louder than words? An empirical investigation in terms of organizational performance in manufacturing organizations, LSJ Acta Zhengzhou University Oversea Version, Vol. 9, No. 4, (2012), pp. 687-693
39 Mirza Jahanzaib, Ather Masood, Khalid Akhtar, Talat Aslam, Improvement in Subsisted Product Delivery Process of Manufacturing Organization using Concurrent Engineering, LSJ Acta Zhengzhou University Oversea Version, Vol. 10, No. 4, (2013), pp. 185-194
40 Mirza Jahanzaib, Syed Athar Masood, Khalid Akhtar, Fahad Al Mufadi, Performance Analysis of Process Parameters Effecting the Automated Assembly System, LSJ, Acta Zhengzhou University Oversea Version, Vol. 10, No. 1, (2013), pp. 64-68
41 Mirza Jahanzaib, Syed Athar Masood, Omer Jamil, Khalid Akhtar, Product Design Variables Optimization using Design for Six Sigma (DFSS) Approach, Acta Zhengzhou University Oversea Version, LSJ, Vol. 10, No. 1, (2013), pp. 57-63
42 Mirza Jahanzaib, Syed Athar Masood, Shahid Nadem, Khalid Akhtar, A Genetic Algorithm (GA) Approach for the Formation of Manufacturing Cells in Group Technology, LSJ, Acta Zhengzhou University Oversea Version, Vol. 9, No. 4, (2013), pp. 799-809
43 Tahla I Khan., M. Jahanzaib, Modeling and Flow Behavior Analysis of Inner Plenum using Computational Fluid Dynamics, European Journal of Scientific Research, Vol. 56, No. 3, (2011), pp.
44 Ghulam Zakria, Yasser Riaz, Mirza Jahanzaib, M. Anwar Khan, Selecting and Prioritizing Key Factors for CAD/CAM Software in Small and Medium Sized Enterprises Using A.H.P, Frontier of Mechanical Engineering in China, Springer, Vol. 5, No. 2, (2010), pp. 157-164
45 Muhammad Khurram Ali, Rafi Javed Qureshi, Shahab Khushnood, and Mirza Jahanzaib, Analytical Hierarchy Process(AHP) based Decision Support Sytem in Global Cement Plant Location; A case study, NUST College of E&ME;, Isamabad, (2012), pp. , Proceedings of the 1st IEEE International Conference on Engineering Management (ICEM-2012)
46 M. Jahanzaib., R.A. Pasha., Zahid Suleman, Cogeneration an Opportunity for Industrial Energy Saving, International Conference on Power Generation Systems and Renewable Technologies, (2010), pp. 403-409
47 Muhammad Khurram Ali, Rafi Javed Qureshi, Mirza Jahanzaib, Selecting Facility Location Using Hybrid Methodologies in Global Perspective: A Case of Cement Plant, Journal of Engineering & Applied Science, X- Category, Vol. 32, No. 2, pp.
48 M. Ashraf, M. Jahanzaib, M. Waseem, S. Hussain, Production Planning and Control of High Tech Products, Technical Journal, Y-Category, (2014), pp.
49 Mirza Jahanzaib, Salman Hussain, Ahmad Wasim, Haris Aziz, Adnan Mirza, Saif Ullah, Modeling of Weld Bead Geometry on HSLA Steel using Response Surface Methodology, International Journal of Advanced Manufacturing Technology, pp.
50 Muhammad Azam, Mirza Jahanzaib, Junaid Ali Abbasi, Ahmad Wasim, Modeling of cutting speed (CS) for HSLA steel in wire electrical discharge machining (WEDM) using moly wire, Journal of Chinese Institute of Engineers, 2016, pp.
51 Masood I, Jahanzaib, M, Haider A, Tool Wear and Cost Evaluation of face Milling Grade 5, Titanium Alloy for Sustainable Manufacturing, Advances in Production Engineering & Management (APEM) 2016, Vol. 11, No. 3, pp. 239-250
52 A. Waqar, A.Wasim, H. Salman, M. Jahanzaib, H. Aziz, Environmental Management System Framework for Sustainability Achievement in Higher Educational Institutions, Journal of Advanced Research in Business and Management Studies, 2016, Vol. 3, No. 1, (2016), pp. 47-70
53 Z. Iqbal, H. M. K. Ali, A. Wasim, S. Hussain and M. Jahanzaib, Evaluating Supplier's Efficiency Using Conjoint Analysis Approach, The Nucleus, Vol. 53, No. 2, (2016), pp. 121-127
54 Hafiz Muhammad Khurram Ali, Mirza Jahanzaib, Javed Akhtar, Amir Sultan, Bakht Bahadur Rana, Adeel Ahsen, Cement Industry Preferences for Captive Power Plants in Perspective of Current Energy Crisis in Pakistan, Journal of Faculty of Engineering and Technology, University of the Punjab, Vol. 23, No. 1, (2016), pp. 65-74
55 H. M. K. Ali, M. U. Farooq, A. Wasim, M. Jahanzaib and S. Hussain, Leverage of Office Automation in a Public Sector Engineering Organization: Pre And Post Implementation Analysis, Pakistan Journal of Science, Vol. 68, No. 2, pp. 170-175
56 Z. U. Abidin, H. M. K. Ali, S. Hussain, A. Wasim and M. Jahanzaib, Supplier Selection in an Industry of Short Life-cycle Products using Bayesian Network Analysis, Pakistan Journal of Science, Vol. 68, No. 2, pp. 157-163
57 M. Jamil, S. Sarfraz, M. Jahanzaib, Investigation of Temperature in Orthopedic Drilling using Response Surface Methodology, Pakistan Journal of Science, Vol. 68, No. 2, pp. 195-202
58 Usama Qazi, Mirza Jahanzaib, Wasim Ahmed, Salman Hussain, An institutional framework for the development of sustainable and competitive power market in Pakistan, Renewable & Sustainable Energy Reviews, Vol. 70, No. 2, pp. 83-95
59 Junaid Abbasi, Mirza Jahanzaib, Muhammad Azam, Wasim Ahmad, Salman Hussain, Musharraf, Effects Of Wire-Cut EDM Process Parameters on Surface Roughness of HSLA Steel, International Journal of Advanced Manufacturing Technology, pp.
60 Muhammad Imran, Changwook Kang, Young Hae Lee, Mirza Jahanzaib, Haris Aziz, Cell Formation in a Cellular Manufacturing System Using Simulation Integrated Hybrid Genetic Algorithm, Computers and Industrial Engineering, Vol. 105, pp. 123-135
61 Abaid Ullah, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Usage and Impacts of speed Humps on Vehicles: A Review, Journal of Advanced Reviews on Scientific Research, Vol. 28, No. 1, pp. 1-17
62 Tooba Sikander, Haris aziz, wasim Ahmad, Salman Hussain, Mirza Jahanzaib, Continuous Quality Improvement (CQI) Framework: A Case of Industrial Engineering department, IJRSEE, International Journal of Cognitive Research in Science, Engineering and Education, Vol. 5, No. 1, (2017), pp. 1-13
63 M. Azam, M. Jahanzaib, J. Abbasi, Ahmad W, S. Hussain, Parametric Analysis of Recast Layer Formation in Wire-cut EDM of HSLA Steel, International Journal of Advanced Manufacturing Technology, Vol. 87, No. 1, pp. 713-722
64 Ullah Saif, Zailin Guan, Li Zhang, Jahanzeb Mirza & Yue Lei, Hybrid Pareto Artificial Bee Colony Algorithm for Assembly Line Balancing with Task Time Variations, International Journal of Computer Integrated Manufacturing, Vol. 30, No. 2, pp. 255-270
65 Neelum, H Aziz, M Jahanzaib, Waseem Ahmad, S Hussain, Integration of Cell Formation and Job Sequencing to Minimize Energy Consumption With Minimum Make-Span, Proc IMechE Part B: J Engineer Manufacture, pp. 1-16
66 Muhammd Irshad Yehya, Salman Hussain, Ahmad Wasim, Mirza Jahanzaib, Hassan Abdalla, A Cost Effective and Light Weight Unipolar Electroadhesion Pad Technology for Adhesion Mechanism of Wall Climbing Robot, International Journal of Robotics and Mechatronics, pp. 1-10
67 Wasif safeen, Salman Hussain, Wasim Ahmad, Mirza Jahanzaib, Haris Aziz, Hassan Abdalla, Predicting the tensile strength, impact toughness, and hardness of friction stir welded AA 6061-T6 using response surface methodology, International Journal of Advanced Manufacturing Technology, pp.
68 Mirza Jahanzaib, Selection of Solar System for Domestic Purpose in Urban Area: from Consumer Perspective, 2nd International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET-2015), (10), pp.
69 Mirza Jahanzaib, Madiha Idrees, Ahmad Wasim, Salman Hussain, Haris Aziz, A Framework for Implementing Quality Function Deployment (QFD) For Utility Services, IOSR Journal of Business and Management (IOSR-JBM), Vol. 18, No. 4, pp. 92-99
70 I. K. Javed, M. Jahanzaib, A. Wasim and H. Salman, Role of Organisational Behaviour (OB) to Enhance Productivity in a Public Sector Enterprise, Journal of Advanced Research in Business and Management Studies, Vol. 3, No. 1, (2016), pp. 11-25
71 Muhammad Khurram Ali, Khalid Akhtar, Mirza Jahanzaib, A Hybrid Multidimensional Approach to Select a Country for Global Cement Plant Location, Mehran University Research Journal of Engineering & Technology, Vol. 34, No. 2, pp. 155-168
72 Saif Ullah, Guan Zailin, Xu Xianhao, He Zongdong , Wang Baox, Mirza Jahanzeb, Modeling of Facility Location Problem for Reverse Logistics System with Uncertainty in Forward and Reverse Flows of Products, International Journal of Mechanical Engineering and Robotics, Vol. 4, No. 3, pp. 242-246
73 Umar Draz, Mirza Jahanzaib, Ghulam Asghar, Identification of Determinants for Globalization of SMEs using Multi-layer Perceptron Neural Networks, Mehran University Research Journal of Engineering & Technology, Vol. 35, No. 1, pp. 39-52
74 Haider, A., Mirza, J., Ahmad, W, Lean capacity planning for tool room: An iterative system improvement approach, Advances in Production Engineering & Management, Vol. 10, No. 4, pp. 169-184
75 Muhammad Sajid, Fahad Almufadi, Mirza Jahanzaib, Chaotic Behavior in a Flexible Assembly Line of a Manufacturing System, Engineering, Technology and Applied Science Research, Vol. 5, No. 6, (2015), pp. 891-894
76 Z. Farrukh , S. Hussain , M. Jahanzaib, A. Wasim, H. Aziz, A Simple Multi-Criteria Inventory Classification Approach, Technical Journal, University of Engineering and Technology, Vol. 20, No. 1, (2015), pp. 70-78
77 Muhammad Khurram Ali, Rafi Javed Qureshi, Mirza Jahanzaib, Selecting Facility Location Using Hybrid Methodologies in Global Perspective: A Case of Cement Plant, Journal of Engineering and Applied Sciences (JEAS), University of Engineering & Technology Peshawar, Vol. 33, No. 1, pp.
78 A. Ali, M Jahanzaib, H. Aziz, Manufacturing Flexibility and Agility: A Distinctive Comparison, The Nucleus, Vol. 51, No. 3, pp. 381-386
79 G Asghar, Mirza Jahanzaib, Nouman, Leverage of Advanced Manufacturing Effectiveness: A Case of Apparel Industry, Technical Journal of Engineering and Technology, Taxila, Vol. 19, No. 3, pp. 18-27
80 Kamran Gohar, Mirza Jahanzaib, Khurram Ali, Consumer Preferences for Selection of Solar System for Domestic Purposes in Urban Areas, Pakistan, Mehran University Research Journal of Engineering & Technology, Vol. 33, No. 4, pp.
81 Muhammad Azam, M Jahanzaib, Wasim Ahmad, S Hussain, Surface Roughness Modeling using RSM for HSLA Steel by Coated Carbide Tools, International Journal of Advanced Manufacturing Technology, Vol. 78, No. 5, pp. 1031-1041
82 Aftab Haider, M Jahanzaib, An implementation of Lean scheduling in Job Shop Environment, Advances in Production Engineering & Management, Vol. 10, No. 1, pp. 5-17
83 G. Asghar, W. Safeen, M. Jahanzaib, An Alternate Model of Aggregate Production Planning for Process Industry: A Case of Cement Plant, Technical Journal UET Taxila, Vol. 20, No. 2, (2015), pp.
84 I.Tahir, Mirza. Jahanzaib, A. Wasim, S. Hussain, An Integrated Approach of Value Stream Mapping and Simulation for Process Improvements, Technical Journal UET Taxila, Vol. 20, No. 2, (2015), pp.
85 Muhammad Umair, Muhammad Abbas, Chaudhary, Mirza Jahanzaib, A Review of Large-Scale Hydropower Project in Public Sector of Pakistan, KICEM Journal of Construction Engineering and Project Management, Vol. 4, No. 4, pp.
86 R.Anwar, M. Jahanzaib, G.Asghar, A. Wasim, S.Hussain, Optimization of Surface Roughness for Al-Alloy 7075-T in Milling Process, Technical Journal UET Taxila, Technical Journal UET Taxila, Vol. 20, No. 2, (2015), pp.
87 M. Imran, N. Iqbal, M. Jahanzaib, Minimization of Intercellular Movements in Cellular Manufacturing System Using Genetic Algorithm, Technical Journal, University of Engineering and Technology, Taxila, Vol. 19, No. 2, (2014), pp. 16-22
88 Ullah SAIF, Zailin GUAN, Boaxi WANG, Jahanzeb MIRZA, Pareto lexicographic ?-robust approach and its application robust objective assembly line balancing problem, Frontiers of Mechanical Engineering, (2014), pp.
89 M. Jahanzaib., Dr. Khalid Akhtar, Prioritizing Key Quality Indicators for Engineering Education using Analytical Hierarchical Process (AHP): Case Study, Proceedings of Pakistan’s 4th National Conference on Quality Assurance in Education (NCQAE) Lahore, lahore, pp. ,
90 M. Jahanzaib., M. H. Sahir, A Hybrid Approach to the Routing Design Problems of Automated Guided Vehicles System, 1st International Workshop on Emerging Technology on Manufacturing organized by NUST & COMSTECH OIC, Islamabad, pp. ,
91 Dr. Khalid Akhtar., M. Jahanzaib, Production Management for the High Tech. Products – A Manufacturing Simulation Based Approach, 14th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM- 2004), Canada, pp. ,
92 M. Jahanzaib., Dr. Khalid Akhtar, Coping with Low Production Volumes and Very Low Variety for Pakistani Automobile Industry - A Normative Model, 15th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM- 2005), Spain, pp. ,
93 M. Jahanzaib., Dr. Khalid Akhtar, On Testing Manufacturing Strategies for Coping with Low to Medium Production Volumes- Very Low Variety Manufacturing Environment for Automobile Industry of Pakistan, 6th Asia Pacific Industrial Engineering & Management Sciences conference, Manila, Philippines, pp. ,
94 M. Jahanzaib., Dr. Khalid Akhtar, Characterization of Performance Measures for Low to Medium Volume- Low Variety Manufacturing Environment in the wake of WTO Scenario, 16th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM-2006), Limerick University, Ireland, (2006), pp. ,
95 M. Jahanzaib., Dr. Khalid Akhtar, S. A. Masood, Selecting Strategic Factors Influencing Performance of Manufacturing Firm Using Analytical Hierarchal Process, National Conference on Global Conference 2009, FAST, Karachi, (2009), pp. ,
96 Arshed. M., M. Jahanzaib, Simulation Based Decision Support System”(SBDSS) for the Vehicles Repair and Maintenance in Dynamic Business Environment, Institute of Industrial Engineering, USA, IEOM, Bangladesh, (2009), pp. ,
97 M. H Aziz, Summyia Qamar, Chanchal Saha, SaifUllah Khan, Mirza Jahanzaib, Customer Orders Prioritization Using TOPSIS in Multi Business Channel Environment, Industrial Engineering and Operation Management Kuala Lumpur, Kuala Lumpur, (2016), pp. ,
98 N. Ahmad., M. Jahanzaib., R. Javed, Experimentation Investigations of Hybrid Production Flow Engaged in Gun Barrel Manufacture, Technical Journal of University of Engineering & Technology 2006, Taxila, (2006), pp.
99 M. Jahanzaib., N. Ahmad., Dr. K. Akhtar, Volume versus Variety Flexibility in Discrete Parts Manufacturing Organizations in Pakistan, The Pakistan Engineers, Journal of the Institution of Engineers, (2005), pp.
100 M. Jahanzaib., N. Ahmad., R. Javed, A Rule Based Layout Classification Scheme of Automated Guided Vehicles System, Technical Journal of University of Engineering & Technology, Taxila, (2001), pp.
101 M. Jahanzaib., N. Ahmad., R. Javed, Knowledge Based Methodology for the Routing Planning Exercise of Automated Guided Vehicles System, Technical Journal of University of Engineering & Technology, Taxila, (2003), pp.
102 N. Ahmad.,M. Jahanzaib., R. Javed, Mathematical Modeling of Hybrid Production Shop Scheduling Engaged in the Manufacture of Multi Processing Single Item / Single Product, Technical Journal of University of Engineering & Technology, Taxila, (2003), pp.
103 Hussain, S., Sattar. T, and Salinas. E., Parameter analysis and design framework for magnetic adhesion wall climbing wheeled robot, International Journal of Intelligent Systems Technologies and Applications, Vol. 11, No. 1, (2012), pp. p. 102-116.
104 Sattar, T., Leon Rodriguez, H.E., Hussain, S., Keynote paper: Robotic Non Destructive Testing, In proceedings of 26th International Conference on CAD/CAM, Robotics and Factories of the Future, Kuala Lumpur, Malaysia, 26th-28th July (2011), pp. 23-41,
105 Hussain, S., T. Sattar, and E. Salinas., Towards Optimum Design Of Magnetic Adhesion Wall Climbing Wheeled Robots, In proceedings of 26th International Conference on CAD/CAM, Robotics and Factories of the Future, Kuala Lumpur, Malaysia, 26th-28th July (2011), pp. 716-728,
106 Sattar, T., Lobarch, M., Hussain S and Leon Rodriguez, H.E., Pole Placement Control of a Wall Climbing Vortex Machine, in proceedings of 13th International Conference On Climbing and Walking Robots and the Support Technologies for Mobile Machines, Nagoya, Japan, 31 August-3 September (2010), pp. ,
107 Leon Rodriguez, Hussain, S., H.E., Sattar, T., A Compact Wall-Climbing and Surface Adaptation Robot for Non-Destructive Testing, in proceedings of the 12th International Conference on Control, Automation and Systems, Jeju, Korea, 17th-21st October (2013), pp. ,
108 Ahmad Wasim, Essam Shehab, Hassan Abdalla, Ahmed Al-Ashaab, Robert Sulowski, Rahman Alam, An innovative cost modelling system to support lean product and process development, The International Journal of Advanced Manufacturing Technology, Vol. 65, No. 1, (2013), pp. 165-181
109 Ahmad Wasim, Essam Shehab, Hassan Abdalla, Ahmed Al-Ashaab, Cost modelling to support lean product and process development: Current industrial practices and future research direction, Proceedings of the10th International Conference on Manufacturing Research (ICMR2012), Aston University, United Kingdom, Sept 11-13 (2012), pp. 262-267,
110 Essam Shehab, Ghunaim Al-Anazi, Ahmad Wasim, Recycling cost modelling methodology of carbon fibre composites, Proceedings of the10th International Conference on Manufacturing Research (ICMR2012), Aston University, United Kingdom, Sept 11-13 (2012), pp. 256-261,
111 Essam Shehab, Weitao Ma, Ahmad Wasim, Manufacturing cost modelling for aerospace composite applications, The 19th ISPE International Conference on Concurrent Engineering – CE2012, Trier, Germany, Sept 3–7 (2012), pp. 425-433,
112 Essam Shehab, Denis Yatta, Mofreh Hamed, Ahmad Wasim, Finite Element Analysis Process in Design Engineering: Best Practice, The 19th ISPE International Conference on Concurrent Engineering – CE2012, Trier, Germany, Sept 3-7 (2012), pp. 327-338,
113 Ahmad Wasim, Essam Shehab, Hassan Abdalla, Ahmed Al-Ashaab,Rehman Alam, Robert Sulowski, Towards a cost modelling system for lean product and process development, Proceedings of the 9th International Conference on Manufacturing Research (ICMR 2011), Glasgow Caledonian University, Scotland, Sept 6-8 (2011), pp. 151-156,
114 Rehman Alam, Ahmad Wasim, Ahmed Al-Ashaab, Essam Shehab, Celine Martin, Value translation and presentation for lean design, Proceedings of the 9th International Conference on Manufacturing Research (ICMR 2011), Glasgow Caledonian University, Scotland, Sept 6-8 (2011), pp. 1-5,
115 Ahmad Wasim,Essam Shehab, Hassan Abdalla, Ahmed Al-Ashaab, Cost and effort drivers for lean product design projects, Proceedings of the 8th International Conference on Manufacturing Research (ICMR 2010), Durham University, United Kingdom, Sept 14-16 (2010), pp. 397-402,

To access members area, please Login or Register

Navigation