RSS feed



All Publications

Total Publications = 190

1 Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, Demarcation of Fatigue Crack Cumulative Damage (Initiation+ stage I) of Aluminum Alloy under Combined Loading, Life Science Journal, Vol. 10, (2013), pp. 678-683
2 MUDASERULLAH, R. A. PASHA, R.A. RAHMAN and W. ASGHAR, FATIGUE LIFE ESTIMATION OF DIFFERENT WELDING ZONES OF OXY ACETYLENE WELDED ALUMINUM ALLOY (AA 5052-H32), Nucleus, Vol. 50, (2013), pp. 261-265
3 W ASGHAR, M A NASIR, F QAYYUM , M SHAH, M AZEEM, S NAUMAN and S KHUSHNOOD, Investigation of fatigue crack growth rate in CARALL, ARALL and GLARE, Fatigue & Fracture of Engineering Materials & Structures, (2017), pp. published online
4 Muhammad A Nasir, Hina Akram, Zaffar M Khan, Masood Shah, Saad Anas, Zeeshan Asfar and Saad Nauman, Smart sensing layer for the detection of damage due to defects in a laminated composite structure, Journal of Intelligent Material Systems and Structures, (2014), pp.
5 Haroon Qaiser, Suniya Umar, Ali Nasir, Masood Shah & Saad Nauman, Optimization of Interlaminar shear strength behavior of anodized and unanodized ARALL composites fabricated through VARTM process, International Journal of Materials Forming, Springer, (2014), pp.
6 Saad Anas, Ghufran Ur Rehman, NoamanUl-Haq, Zaffar Muhammad Khan, Muhammad Bilal Khan, Saad Nauman, Muhammad Shahid, and Ali Nasir, Influence of MWCNTs as secondary reinforcement material in glass fiber/epoxy composites fabricated using VARTM, Applied Polymer Composites, Smithers Rapra, Vol. 2, No. 1, (2014), pp.
7 Masood Shah, Catherine Mabru, Christine Boher, Sabine Leroux, Farhad Rezai-Aria, Crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens, Advanced Engineering Materials - Wiley –VCH, Germany, Vol. 11, No. 9, (2009), pp. 746 - 749
8 M. Shah, C. Boher, S. Leroux, F. Rezai-Aria, C. Mabru, An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens, Metallurgical Research & Technology, No. 3, (2009), pp. 140-146
9 Masood Shah, Catherine Mabru, Farhad Rezai-Aria, Ines Souki, Riffat Asim Pasha, An estimation of stress intensity factor in a clamped SE(T) specimen through numerical simulation and experimental verfication: case of FCGR of AISI H11 tool steel, Acta Metallurgica Sinica - English Letters, Vol. 24, No. 4, (2012), pp. 307-319
10 Amir Sultan, Riffat Asim Pasha, Mifrah Ali, Muhammad Zubair Khan, Muhammad Afzal Khan, Naeem Ullah Dar, Masood Shah, Numerical simulation and experimental verification of CMOD in SENT specimen: Application on FCGR of welded tool steel, Acta Metallurgica Sinica - English Letters, Vol. 26, No. 1, (2013), pp. 92-96
11 Samra Arooj, Masood Shah, Shahid Sadiq, Syed Hussain Imran Jaffery, Shahab Khushnood, Effect of Current in the EDM Machining of Aluminum 6061 T6 and its effect on the surface morphology, Arabian Journal for Science and Engineering, Vol. 39, No. 5, (2014), pp. 4187 - 4199
12 Ktari. A,Baccar. M,Shah. M,Haddar. N,Ayedi. HF, Rezai?Aria. F, A crack propagation criterion based on ?CTOD measured with 2D-digital image correlation technique, Fatigue and Fracture of Engineering Materials and Structures, (2014), pp.
13 F. Qayyum, M. Shah, S. Manzoor and M. Abbas, Comparison of thermomechanical stresses produced in work rolls during hot and cold rolling of Cartridge Brass 1101, Materials Science and Technology, (2014), pp.
14 Muhammad Ali Nasir, Zaffar Khan, Ilyas Farooqi, Saad Nauman, Saad Anas, Shahid Khalil, Asim Pasha, Zubair Khan, Masood Shah, Haroon Qaiser, Rana Ata, Transverse Shear Behavior of Nomex Core for Sandwich Panels, Mechanics of Composite Materials, (2014), pp.
15 A. Sultan, S. M. R. Shah, R. A. Pasha, Haris Ali, Asim Zulfiqar, Fatigue Crack Growth Behaviour of AISI 50100 Precipitation Hardened Steel after Welding, IBCAST 2010, Pakistan, January 11 – 14, 2010 (2010), pp. ,
16 M. Ali Raza Abid, M. Irfan Sarwar, Ahmad Tahir, Sayyid Masood Shah, M. Shehryar, Gas turbine blade flow analysis comparison using CFD and wind tunnel, IBCAST 2010, Pakistan, January 11 – 14, 2010 (2010), pp. ,
17 MASOOD SHAH, CATHERINE MABRU, CHRISTINE BOHER, SABINE LEROUX, FARHAD REZAI-ARIA, An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens, 12th International Spring Meeting FATIGUE AND PLASTICITY: FROM MECHANISMS TO DESIGN, France, May 20-22, 2008 - Paris (2008), pp. ,
18 M. SHAH, C.MABRU, C. BOHER, S. LeRoux, F. Rezai-Aria, Crack propagation in X38CrMoV5 (AISI H11) tool steel, Tool 2009 - Tool Steels, Germany, June 2nd – 4th 2009 (2009), pp. ,
19 Masood Shah, Catherine Mabru, Farhad Rezai-Aria, Investigation of crack propagation in X38CrMoV5 (AISI H11) tool steel at elevated temperatures, Fatigue 2010, Procedia Engineering, Prague - Czech Republic, June 6 - 11, 2010 (2010), pp. 2045-2054,
20 M. BACCAR, M. SHAH, N. HADDAR, F. REZAI-ARIA, Investigation into the fatigue crack growth in hot work steel using crack tip opening displacement (DCTOD), First international congress on materials, environment and durability, Hammamet, Tunisia, 22-24 March, 2012 (2012), pp. ,
21 Masood SHAH*, Mifrah ALI, Amir SULTAN, Muhammad MUJAHID, Haroon MEHMOOD,Naeem Ullah DAR, Mohammad SHUAIB, An Investigation into the Fatigue Crack Growth Rate of Electron Beam Welded H13 Tool Steel: Effect of Welding and Post Weld Heat Treatment, Metallography, Microstructures and Analysis, Vol. 3, No. 2, (2014), pp. 114-125
22 S. Hayat, A Khan, M Shahid Khalil, Evaluating Effectiveness of Tamper-Proofing on Dynamic Graph Software Watermarks, International Journal of Computer Science and Information Security, (2009), pp. Pages 1-9
23 Aihab Khan, M Shahid Khalil, Design and Implementation of Human Computer Interface System Based on Eye Movement Tracking, International Journal of Human-Computer Interaction, (2009), pp.
24 Q. Iqbal, S Khushnood, M A Qureshi, M. Shahid. Khalil, G. Y. Chohan, Modeling Of Thermal Damping in a Multi-Span Tube Bundle, Kuwait Journal of Science and Technology,, (2009), pp.
25 N K Raja, M. Shahid. Khalil, Design And Fabrication Of An Economic Model For Sustainable Development Of Solar Energy Technology In Pakistan, International Journal of Green Energy, United Kingdom, (2009), pp.
26 M Abid, M. Shahid Khalil, Implementation of Integrated Process Plan for an artificial hip implant - A Case Study’, SADHANA Academy Proceedings in Engineering Sciences. SADH-D-08-0038, Under Review
27 Sajjad Akbar, M Shahid Khalil, Quality of Health Care for Industrial Employees, New Horizons, International Research Journal, Green University, No. 2, (2009), pp.
28 Liaquat Khan, M Shahid Khalil, Thermo economic Lifecycle cost Optimization of a shell and tube heat exchanger using evolutionary algorithms, International Journal of Computing and Fluid Dynamics, (2009), pp.
29 N Raja, M. Shahid Khalil, Manufacturing Of Parabolic Trough Solar Collector System For A Developing Country Pakistan, Open Renewable Energy of International Journal, (2009), pp.
30 M Shahid Khalil, Ashraf Butt, Applying Taguchi loss function to Textile sector of Pakistan, International Journal of Industrial Engineering and Management, (2009), pp.
31 Nusrat Kamal Raja, M. Shahid Khalil, Design and Manufacturing of Parabolic Trough Solar Collector System for a Developing Country Pakistan, International Journal of Green Energy, United Kingdom, (2009), pp.
32 M. Shahid Khalil, Hafiz Ihsanullah, Implementation of quality improvement tools in brass industry to improve quality & enhance productivity, International Journal of Quality Improvement, (2009), pp.
33 Aihab Khan, M Shahid Khalil, Effect of Pesticides on Human Life through Visual Data Mining, The Journal of Theoretical and Applied information Technology, (2010), pp.
34 A Khan, M Shahid Khalil, Sikandar Khyal, Online Credit Card Fraud Prevention System for Developing Countries, International Journal of Revision and Computing, (2010), pp.
35 Irfan Mirza, S Aqeel, M Shahid Khalil, Pakistan Wind Risk Concept For Development Of Wind Energy In Emerging Markets, International Journal of the Political, Economic, Planning, Environmental and Social Aspects of Energy, Elsevier Editorial System, (2010), pp.
36 M Amin, M Shahid Khalil, Sajjad Akbar, Optimal surface quality of complex contour jobs through Multi-axis CNC milling and response surface method, International Journal of Precision Engineering, Elsevier Editorial System, (2010), pp.
37 M Rizwan Khan, M Shahid Khalil, Mass customizing a job shop environment, International Journal of Mass Customization, Elsevier Editorial System, (2010), pp.
38 M Abid, M Shahid Khalil, Micromechanics of Kevlar 49/Epoxy Composites: Estimation of Elastic Constants and Effect of Fiber Volume Fraction using FEM Analysis, International Journal of Mechanical Engineering, (2010), pp.
39 I Ramay, M Shahid Khalil, M Bilal, Employees’ performance and HRM practices : Study of banking sector in Pakistan, International J of HRM practices, (2010), pp.
40 I Ramay, M Shahid Khalil, Mohsin Ali, Job satisfaction (antecedents and out comes) : Hospitals in Islamabad / Rawalpindi, Interl J of Manangement practices, (2010), pp.
41 I Ramay, M Shahid Khalil, K Bashir, Antecedents of organizational commitment A study of financial managers of Pakistan, Interl J of Financial Management, (2010), pp.
42 I Ramay, M Shahid Khalil, K Bashir, Antecedents of organizational citizenship behavior, A study in telecom sector J Communication and its Management, (2010), pp.
43 I Ramay, M Shahid Khalil, B Sultan, Antecedents of organizational learning: A study in telecom sector, J Communication and its Management, (2010), pp.
44 I Ramay, M Shahid Khalil, M Usman, Consequences of organizational commitment: A study of financial sector of Pakistan, J Human Resource and its Practices, (2010), pp.
45 Abida Ellahia, M. Shahid Khalil, Fouzia Akrama, Computer users at risk, Health disorders associated Journal of Business Management and Economics with prolonged computer use, (2011), pp. 171-182
46 Khalid Hashmi, M Shahid Khalil, Design and development of a dynamometer for high speed milling operations, Advanced Science Letter (ASL) American Scientific Publishers, (2012), pp.
47 M. Waheed, Zahid Khan, M Shahid Khalil, Creative learning environment and knowledge management, International Journal of Academic Research in Business and Social Sciences, No. 1, (2012), pp.
48 M Shahid Khalil, Khalid Hashmi, Measurement and Analysis of forces during High speed milling of EN30Alloy Steel, J of high speed machining, (2012), pp.
49 Khalid Hashmi, M Shahid Khalil, Design development and calibration of a dynamometer for high speed milling operations, Advanced Science Letter (ASL) American Scientific Publishers, (2012), pp.
50 M Shahid Khalil, Measurement and Analysis of Forces during High Speed Milling of EN-30B Alloy Steel, Journal of Basic and Applied Scientific Research, (2013), pp. 888-895
51 M Shahid Khalil, Evaluation and prioritization of key parameters for high speed machining of Titanium Alloys, Life Science Journal, (2013), pp. 124-130
52 M Shahid Khalil, Deformation Investigations of Weld Based Rapid Prototyping, Research Journal of Applied Sciences, Engineering and Technology, Under Review
53 M Shahid Khalil, A Novel Approach for Welding Dissimilar Metals with Enhanced Galvanic Corrosion Resistance, Journal of Wuhan University of Technology-Master.Sci.Ed, (2013), pp.
54 M Shahid Khalil, Parametric Study of “CDS” Thin Films Produced Using Chemical bath Deposition Process for Application as Buffer Layer, Advances in Materials Science and Engineering, (2013), pp.
55 M Shahid Khalil, Difficulty faced by working women. A study of banking sector of Islamabad , Pakistan, Asian Journal of research in banking and finance, (2013), pp.
56 M Shahid Khalil, Nasir Kaleem Zafar, Application of six sigma for enhancing mean time between failure of fuel accessories of turbo jet engines, Review of social studies, Law and Psychology, (2013), pp.
57 M Shahid Khalil, Comparison of Performance Measurements of Photovoltaic Modules during Winter Months in Taxila, Pakistan, International Journal of Photo Energy, Under Review
58 M Shahid Khalil, Nasir Kaleem Zafar, Application of six sigma for enhancing mean time between failure of fuel accessories of turbo Jet engines, Greece International Multidisciplinary Academic Conference, (2013), pp.
59 M Shahid Khalil, Sajjad Akbar, Assessment of life of pressure vessels and pipes in crude oil and gas industries in Pakistan, International ASME power 2013 conference, July 29-Aug 1, 2013, Boston, Manssachusetts, (2013), pp.
60 M Shahid Khalil, Experimental Based Tensile Strength Variability of Multilayered Composites, Fabricated via. Optimized “VARTM” Technology, IBCAST, (2014), pp.
61 Liaquat A Khan, M Shahid Khalil, Thermo economic Lifecycle Energy Recovery System Optimization For Central Air- Conditioning System Using Evolutionary Technique, Mehran University Research Journal of Engineering and Technology, September, (2009), pp.
62 Liaquat A Khan, F Mahfooz, M Shahid Khalil, Exergetic Lifecycle cost optimization of a shell and tube heat exchanger, Mehran University Research Journal of Engineering and Technology, No. 4, (2009), pp. 419-428
63 Sajjad Akbar, M Shahid Khalil, Economic of indigenous technical development, Journal of Research and Bussiness strategies, Zabist University, Karachi, (2009), pp.
64 Shahzad Ali Khan,. M Shahid Khalil, Sajjad Akbar, Sick, Poor, Private worker; low quality healthcare Services for the private industrial employees in Pakistan, Journal of Mehran University, Jamshoro, (2009), pp.
65 Hussain, M Shahid Khalil, Analysis and investigation methods for Boiler Tube Failure, Proceedings of the 3rd International conference on Aerospace Science and Engineering Islamabad, Pakistan (ICASE 2013), August 21-23, (2013), pp.
66 M Shahid Khalil, Shahzad Ali Khan, Behavior of man, not machines, causes machine injuries, First Regional Conference on Injury Prevention and Safety Promotion, Cairo, Egypt, 10-12, , 10-12 February 2009 (2009), pp. ,
67 M. Shahid Khalil, Shahzad Ali Khan, Road Design and Furniture: important determinants of road safety, First Regional Conference on Injury Prevention and Safety Promotion, Cairo, Egypt, 10- 12, Cairo, Egypt., 10-12 February 2009 (2009), pp. ,
68 Sajjad Akbar, M. Shahid Khalil, Protection and Monitoring of Ionizing Radiation- nuclear medicine, 17th International conference on Nuclear Engineering (ICONE-17) July 15 – 21, , (2009), pp. ,
69 Bashir, M. Shahid Khalil, S Akbar, Detailed engineering customization – a cost and time effective approach in the manufacturing of steel structures, 17th International conference on Nuclear Engineering (ICONE-17), July 15 – 21, , (2009), pp. ,
70 M. Shahid Khalil, S. Akbar, Friction Welding of Mild Steel Components, 17th Intl conf on Nuclear Engineering (ICONE-17), July 15 – 21, , (2009), pp. ,
71 M. Shahid Khalil, Waqas Ahmad, Influence of local culture for the in the development of quality, 16th ACPQO’s International conference of Quality 17-19 September, 2010, University of Khatmandu, Nepal, University of Khatmandu, Nepal, (2010), pp. ,
72 Altaf Khan, M Shahid Khalil, Natural Gas crises and its probable solution, International conference on power generation and renewable energy, IIU, Islamabad, November 29 - December 2, , (2010), pp. ,
73 M Shahid Khalil, A. Janjua, Utilization of Renewable energy potential in Pakistan : A goal oriented approach through industry cum academia linkage, International conference on power generation and renewable energy, IIU, Islamabad, November 29 - December 2, , (2010), pp. ,
74 Irfan Mirza, M Shahid Khalil, Risk energy management in the power generation through wind energy, International conference on power generation and renewable energy, IIU, Islamabad, November 29 - December 2, , (2010), pp. ,
75 Kashif Nawaz, M Shahid Khalil, A study of the relationship between precision machining and parameters of an offset beam slotted antenna, Proceedings of the IBCAST conference, Islamabad, , (2010), pp. ,
76 M. Shahid Khalil, N Raja, Design And Manufacturing Of Parabolic Trough Solar Collector System For A Developing Country Pakistan, Renewable Energy World Conference, Japan, (2010), pp. ,
77 M Shahid Khalil, Sajjad Akbar, Management of Aging and Fatiguing for Nuclear Power Plants (NPP), ASME 2010 International Mechanical Engineering (IMECE 2010), November, 11-18 2010, Canada, (2010), pp. ,
78 M. Shahid Khalil, Sajjad Akbar, Life Assessment of Pipes & Pressure Vessels of a Petro-Chemical Plant, International Conference & Exhibition ICONE 20, 30th July – August 3, 2012, Anaheim, California, USA, pp. ,
79 Amar Mehdi, M. Shahid Khalil, Asnaf Qadar, Increasing Productivity in a Manufacturing Organization by implementation of Six Sigma: a Case Study, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, pp. ,
80 Amar Mehdi, M. Shahid Khalil, Asnaf Qadar, Increasing Productivity in a Manufacturing Organization by implementation of Six Sigma: a Case Study, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, pp. ,
81 M. Shahid Khalil, Tariq Yasin, Chemical milling for Aerospace structures, Proceedings of the IMEC 2010, Sept 27-28, 2010, UET Taxila, pp. ,
82 Baharul Amin, M Shahid Khalil, Selection of steam jet ejector for vacuum genration in cross flow surface condenser, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, pp. ,
83 M Nadeem Khan, M Shahid Khalil, Vertical Transportation System in High Rise Building, Proeedings of the IMEC 2010, Sep 27-28, Taxila, (2010), pp. ,
84 M. Rizwan Anwar, M Shahid Khalil, Effects of Spindle Speeds on Wear and Tear of Cutting Tools, Object geometry and Machining processes, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, pp. ,
85 Ali Raza, M Shahid Khalil, Optimum performance under varying stress environment in a typical industrial setup, Proceedings of the IMEC 2010, September 27-28, 2010, UET Taxila, (2010), pp. ,
86 Irshad Faisal, M Shahid Khalil, Economics of Aluminum Scrap Recycling at PAC KAMRA, Proc of the IMEC 2010, Sep 27-28, 2010, UET Taxila, (2010), pp. ,
87 M. Abid, M. S. Khalil, Performance of a gasketed flange joint under combined internal pressure, axial and thermal loading, Proceedings of the IMEC 2010, October 27-28, 2011, UET Taxila, (2010), pp. ,
88 Yamin Younis, Atiqa Bibi, Anwar-ul-Haque, Khushnood. S, Vortical Flow Topology on Windward and Leeward side of Delta Wing at Supersonic Speed, Journal of Applied Fluid Mechanics, (2009), pp.
89 Khushnood. S, Zaffar M. Khan, M.Afzaal Malik, Qamar Iqbal, Sajid Bashir, Muddasar Khan, Zafarullah Koreshi, Mahmood Anwar Khan, Tahir Nadeem Malik & Arshad Hussain Qureshi, Modeling and Analysis of Thermal Damping in Heat Exchanger Tube Bundles, Journal of Nuclear Engineering and Design, Reference NED-D-09-00288, (2010), pp.
90 Muddasar Khan, Cesar Levy, Amer Hameed, Zulfiqar Khan, Khalid Orakzai, Musarrat Khan, Khuram Shahazad, Afzaal M. Malik & Khushnood. S, An Analysis of Dome Reversal in Metal Beverage Container Based on Finite Element Methods, Journal of Structural Durability & Health Monitoring, SDHM, (2010), pp. 1-15
91 Haider Abbas, Khushnood. S, Fostering R&D Performance using Knowledge Management, African Journal of Business Management, AJBM-11-115, (2011), pp.
92 A.H Mailk, M.S.I. Alvi, Khushnood. S, F.Mahfooz, K.K. Ghauri, A.Shah, Esperimental study of conjugate heat transfer within a bottom heated vertical concentric cylindrical enclosure, International Journal of Heat & Mass Transfer, (2011), pp. 1154-1163
93 Shahab Khushnood et al., Chapter Titled, Cross-Flow-Induced-Vibrations in Heat Exchanger Tube Bundles: A Review, Book Titled "Nuclear Power Plants, (2012), pp. 71-128
94 M.J. Iqbal, N.A. Sheikh, H.M. Ali, S. Khushnood, M. Arif, Comparison of Empirical Correlations for the Estimation of Conjugate Heat Transfer in a Thrust Chamber, Life Science Journal 2012, Vol. 9, (2012), pp. 708-716
95 Sadaf Siddiq, Shahab Khushnood, Zafar Ullah Koreshi, Tasneem Shah, Arshad Qureshi, Optimal Energy Recovery from ammonia Synthesis in a Solar Thermal Power Plant, Arabian Journal for Science and Engineering, AJSE-D-11-00559R2 (2012), (2012), pp.
96 Sadaf Siddiq, Shahab Khushnood, Zafar Ullah Koreshi, Tasneem Shah, Arshad Qureshi, Simulation of Ammonia Synthesis for Optimal Energy Recovery in a Once-Through Plug Flow Reactor, Arabian Journal for Science and Engineering, AJSE-D-11-01344R1, Under Review
97 Masood Shah, Samra Arooj, Shahid Sadiq, Syed Hussain Imran Jaffery, Shahab Khushnood, Effect of Current in the EDM Machining of Aluminum 6061 T6 and its Effect on the Surface Morphology, The Arabian Journal for Science and Engineering – AJSE-D-12-02114, (2013), pp.
98 K.M.Khan, S.Khushnood, Numerical Simulation of Aero-spike nozzle in-viscid Isentropic Flow-Field, Life Science Journal, Vol. 10, (2013), pp.
99 Syed Gul Hassan Naqvi, Syed Thar Masood, Shahab Khushnood, Ali Rzwan, Mirza Jahanzaib,, The Rollover Prediction and Prevention of Bullet Proof Vehicles for Improved Stability, Life Science Journal, Vol. 10, (2013), pp.
100 Abu Bakar Izhar, Arshad Hussain Qureshi and Shahab Khushnood, Simulation of Vortex Induced Vibrations of A Cylinder Using ANSYS CFX, Journal – China Ocean Engineering, (2013), pp.
101 Asif Hussain Malik, Shahab Khushnood and Ajmal Shah, Experimental and Numerical Study of Buoyancy Driven Flow within a Bottom Heated Vertical Concentric Cylindrical Enclosure, Journal – Natural Science, Scientific Research Open Access, (2013), pp.
102 Azhar Munir, S. Khushnood, Naveed, Effect of Material Flaws on Structural Dynamics & Aero-Elastic Analysis of a Low Carbon Steel Plate, Arabian Journal of Science & Engineering, Under Review
103 Luqman A. Nizam, S. Khushnood, Masood Shah, S. Manzoor, Muhammad Atif Niaz, Muhammad Usman & Aneela Anum, Experimental Analysis of Cross-Flow-Induced-Vibrations in Heat Exchanger Tube Bundle, Nulcear Engineering & Design, Under Review
104 Khushnood. S, Qamar Iqbal, Techniques for Thermal Damping in Tube Bundles, Mehran University Research Journal of Engineering & Technology, (2009), pp.
105 K. Shehzad and S. Khushnood, A New Technique to Improve Comprehensibility in Inductive Learning, Technical Journal, University of Engineering & Technology Taxila,, (2010), pp. 56-64
106 S. Siddiq, S. Khushnood, Z.U. Koreshi and M.T Shah, Solar Thermal Energy Storage using Liquid Ammonia Systems in Industry, NUST Journal of Engineering Sciences, (2010), pp. 53-58
107 Sadaf Siddiq, Shahab Khushnood, Zafar Ullah Koreshi, and Tasneem Shah, Process Simulation of Ammonia Synthesis for Increasing Heat Recovery in a Thermal Storage Plant: A Review, Technical Journal, University of Engineering & Technology, Taxila, (2011), pp. 68-91
108 Khushnood. S,, Metallurgy and Heat Treatment, Publisher National Book Foundation, Ministry of Education, Pakistan, (2012), pp.
109 Sajid Bashir, M. Anwar Khan, Khushnood. S, Vibration analysis of gas turbine blade using Finite Element Method, Technical Journal, University of Engineering and Technology, Taxila, (2012), pp.
110 Sajid Bashir, M. Anwar Khan, Khushnood. S, Effects of humidity and backspin in spherical bodies moving in compressible fluid, Technical Journal, University of Engineering and Technology, Taxila, (2012), pp.
111 Z.U. Hassan, M.M.I. Hammouda, S. Khushnood, K. Akhtar, M. Jahanzeb and A. Malik, Experimental and Numerical Analysis of Fretting Fatigue Crack Initiation in Dovetail Joint for Aero Engine Compressor, A quarterly Scientific Journal of Pakistan Atomic Energy Commission, NCLEAM, (2012), pp. 255-264
112 Azhar Munir, S. Khushnood & N. Ahmed, 2013, Effect of Material Flaws on the Modal Parameters of Isotropic Material using Ground Vibration Testing, The Nucleus, (2013), pp. 189-207
113 Muddasar Khan, Khushnood. S, Afzaal Malik, And Musarrat Khan, A Comparative Parametric Study of Single Step and Double Step Swage Autofrettage in Swaged Metal Tubes, Proceeding of 17th International Conference on Nuclear Engineering (ICONE-17), Brussels, Belgium, (2009), pp. ,
114 Muddasar Khan, Khushnood. S, Afzaal Malik, And Musarrat Khan, Modeling and Simulation Of Multistage Autofrettage in Pressure Vessels, Proceeding of 17th International Conference on Nuclear Engineering (ICONE-17) July 12-16, Brussels, Belgium, (2009), pp. ,
115 Muddasar Khan, Khushnood. S, Afzaal Malik, Sajid Bashir and Musarrat Khan, On The Optimum Flow-Induced Vibration of A Tube In Heat Exchanger Tube Bundle, Proceeding of 17th International Conference on Nuclear Engineering (ICONE-17) Brussels, Belgium, Brussels, Belgium, (2009), pp. ,
116 Muddasar Khan, Khushnood. S, Afzaal Malik, And Musarrat Khan, A Parametric Study of Catastrophic Failure in Metal Tubes Subjected to Single and Double Step Swage Autofrettaged, IRF'2009 3rd International Conference on Integrity, Reliability & Failure, Porto, Portugal, 20-24 July 2009 (2009), pp. ,
117 Afzaal M. Malik, Sabeeh H. Raza, Muddasar khan, and Khushnood. S, Analysis of Vibratory Stresses in a Turbine Blade using Surface Coating, IRF'2009 3rd International Conference on Integrity, Reliability & Failure, Porto, Portugal, (2009), pp. ,
118 J.S.Bhatti, R.A.Pasha, Finite Element Based Design of Piezoelectric Vibration Damper, Key Engineering Materials, (2010), pp. 431-437
119 Nadeem Ahmed, Riffat Asim Pasha, MMI Hammouda, Temperature Effects on Impact Energy of Tungston Alloy, Advanced Materials & Processes, (2011), pp. 35-37
120 Amir Sultan, Riffat Asim Pasha, Sayyid Masood Ur Rehman Shah, Haris Ali, Asim Zulfiqar, Fatigue Crack Growth Behaviour of AISI 50100 Precipitation Hardened Steel after welding Comparison of Welded and Base Metal in 1045 Steel, Advanced Materials for Applied Science and Technology II, (2012), pp. 9-14
121 Masood Shah; Catherine Mabru; Farhad Rezai-Aria; Ines Souki; Riffat Asim Pasha, An Estimation of Stress Intensity Factor in a Clamped SE(T) Specimen Through Numerical Simulation and Experimental Verification, Case of FCGR of AISI H11 Tool Steel, Acta Metallurgica Sinica(English Letters), (2012), pp. 307-319
122 Amir Sultan, Riffat Asim Pasha, Masood ur Rehman, M.Zubair Khan, M. Afzal Khan,Naeem Ullah Dar, Numerical simulation and experimental verification of CMOD in SE(T) specimen, Application on FCGR of welded tool steel accepted for publication in Acta Metallurgica Sinica (English Letters), (2012), pp.
123 Riffat Asim Pasha, M.Z.Khan, Thermal Shocking of a Thin Lead Zirconate Titanate Piezoelectric Ceramics disc, Proceedings Pakistan Academy of Science, Vol. 46, (2009), pp. 47-52
124 Riffat Asim Pasha Zahid Suleman and M. Z. Khan, Analysis of Thickness Effect on Piezoelectric Beam, Technical Journal, UET Taxila (2009), Vol. 14, (2009), pp. 50-54
125 Riffat Asim Pasha, Muhammad Zubair Khan, Effect of Thermal Shocking and Quenching on the Degradation Behaviour of a Thin PZT Disc, Pakistan Journal of Scientific and Industrial Research,2010, Vol. 53, (2010), pp. 1-5
126 Riffat Asim Pasha, Gulistan Raja, Effect of Frequency ad Resistance by Temperature Variation on Lead Zirconate Titanate Piezoelectric Ceramics disc, The Nucleus (2011), (2011), pp. 191-197
127 Riffat Asim Pasha, Talal Ahmed, Determination of orthotropic mechanical property of honeycomb core: a comparative analysis, The Nucleus 2012, (2012), pp. 79-87
128 Riffat Asim Pasha, Khalil-ur Rehman, Masood Shah, Determination And Demarcation Of Fatigue Crack Initiation Phase In Rotating Bending Condition, The Nucleus 2012, (2012), pp. 165-169
129 A. T. Jarral M.Ali ,M.H Sahir,R.A Pasha,Design, Optimization And Analysis Of Vertical Axis Wind Turbine Blade, The Nucleus 2012, (2013), pp. 7-12
130 A. T. Jarral ,R.A Pasha, Measurement and Supperssion of cutting tool vibration using Piezoelectric ceramic in ANSYS, The Nucleus 2012, (2013), pp. 149-153
131 A.Hameed, R.A Pasha, A.R. Khan, M.Z.Khan and M.Shah, To investigate the effect of heat treatment on fracture toughness of welded joints, The Nucleus (2013) 50, (2013), pp. 165-172
132 R.A Pasha, 16. Fatigue Life Estimation of Different Welding Zones of Oxy Acetylene Welded Aluminum Alloy (AA 5052-H32),, The Nucleus 2013, (2013), pp. 261-265
133 17. Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading, Life Science journal, (2013), pp. 1-6
134 Tayyaba Bano, Nadeem Ahmed Sheikh, S. Manzoor, Shahab Khushnood, Numerical Simulation of Flow past a Square Cylinder, IEEE- IBCAST 2012, Islamabad., Islamabad, (2012), pp. ,
135 Ali, H. M. and Briggs, A, Condensation of R-113 on Pin-Fin Tubes: Effect of Circumferential Pin Thickness and Spacing, J. of Heat Transfer Engineering., (2012), pp. 205-212
136 Ali, H. M. and Briggs, A., Condensation of ethylene glycol on Pin-Fin Tubes: Effect of Circumferential Pin Thickness and Spacing, J. of Applied Thermal Engineering, (2012), pp. 9-13
137 Ali, H. M. and Briggs, A, Enhanced Condensation of ethylene glycol on Pin-Fin Tubes: Effect of Pin Geometry, ASME J. of Heat Transfer., (2012), pp.
138 Iqbal, M.J, Sheikh, N.A, Ali, H. M. et al., Comparison of empirical correlations for the estimation of conjugate heat transfer in a thrust chamber, Life Science Journal, (2012), pp. 708-716
139 Ali, H. M. and Briggs, A, Condensation Heat Transfer on Pin-Fin Tubes: Effect of Thermal Conductivity and Pin Height, J. of Applied Thermal Engineering, (2013), pp. 465-471
140 Bashir, M.A, Ali, H.M, Ali, M. and Siddiqui, A.M, An Experimental Investigation of Performance of Photovoltaic Modules in Pakistan, Online, J. of Thermal Science., (2013), pp.
141 Jajja, S.A., Ali, W. and Ali, H.M, Nanofluids for thermal management of high heat generating computer processors, Accepted, J. of Heat Transfer - Asian Research, (2013), pp.
142 Khattak, Z., Ahmed, J., Ali, H.M. and Shah, S, Contemporary Dust Control Techniques in Cement Industry, Electrostatic Precipitator – A Case Study, World Applied Sciences Journal, (2013), pp. 202-209
143 Ali, H. M. and Briggs, A, Condensation of ethylene glycol on Pin-Fin Tubes: Effect of Circumferential Pin Geometry, 11th UK National Heat Transfer Conference, London, UK., London, UK., (2009), pp. ,
144 Ali, H. M. and Briggs, A, Condensation of Ethylene Glycol on Pin-Fin Tubes, Effect of Circumferential Pin Spacing and Thickness, proceedings of ASME-ATI-UIT Conference on Thermal and Environmental Issues in Energy Systems, Sorrento, Italy, (2010), pp. 1475-1480,
145 Ali, H. M., A Hassan and A Briggs, Enhanced Condensation of Ethylene Glycol on Three-Dimensional Pin-Fin Tubes, 14th International Heat Transfer Conference, Washington, DC, USA, August 8-13 2010 (2010), pp. 11-17,
146 Ali, H. M. and Briggs, A, Effect of Tube Material on Condensation Heat Transfer on Pin-Fin Tubes, Proc. 12th U.K. Nat. Conf. on Heat Transfer, Leeds., , (2011), pp. ,
147 Briggs, A. and Ali, H.M, Surface Tension Enhanced Heat Transfer During Condensation on Finned Surfaces, 7th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi'an, China., Xi'an, China, (2012), pp. ,
148 Ali, H. M. and Briggs, A., An investigation of Condensate Retention on Pin-Fin Tubes, Proc. of the World Congress on Engineering 2013 (WCE 2013),, Imperial College, London, UK, July 3-5 2013 (2013), pp. 1941-1946,
149 Bashir, M.A, Ali, H.M, Ali, M. and Siddiqui, A.M, An Experimental Investigation of Performance of Photovoltaic Modules in Pakistan, Proc. of the International Symposium on Innovative Materials for Processes in Energy Systems 2013 (IMPRES2013), Fukuoka, Japan., Sep. 4-6 2013 (2013), pp. ,
150 M.Schwartz, S.Manzoor, P.Hémon, E. de Langre, By-pass Transition to Airfoil Flutter by Transient Growth due to Gust Impulse, Journal of Fluids and Structures, Vol. 25, (2009), pp. 1272-1281.
151 S.Manzoor, P.Hémon, On the aeroelastic transient behaviour of a streamlined bridge deck section in a wind tunnel, Journal of Fluids and Structures, Vol. 27, (2011), pp. 1216 – 1227
152 Nadeem A. Sheikh, S. Manzoor, A Modified Non-Linear Model for the High Mass Ratio Square Cylinder, Journal of Fluids and Structures, (2012), pp.
153 S. Manzoor, Jawad Khawar, Nadeem Ahmed Sheikh, Vortex Induced Vibrations Of A Square Cylinder With Damped -Free End Conditions, Advances in Mechanical Engineering, 2013, (2013), pp.
154 X. Amandolese, P. Hémon and S. Manzoor, Transient temporal response of a flexible bridge deck submitted to a single gust, Journal of Computational and Applied Mathematics, (2012), pp.
155 Nadeem Ahmed Sheikh, S. Manzoor, Usman Ghani, Evaluating energy flux in vibro- fluidized granular bed, Advances in Mechanical Engineering doi 10.1155/2013/327379., (2013), pp.
156 S. Manzoor, Jawad Khawar, Nadeem Ahmed Sheikh, Vortex induced vibrations of a square cylinder with damped – free end conditions, Advances in Mechanical Engineering, doi 10.1155/2013/204974, (2013), pp.
157 X. Amandolese, P. Hémon, S. Manzoor, The transient temporal response of a flexible bridge deck subjected to a single gust, Journal of Computational and Applied Mathematics, Vol. 246, (2013), pp. 153 – 160
158 S.Manzoor, P.Hémon, X.Amandolèse, Vortex Induced Vibrations of a Square Cylinder. ASME, 3rd FEDSM 2010 Montreal, Canada, Canada, (2010), pp. ,
159 M. Shehryar, P. Hemon, Transient Behavior of a Streamlined Bridge Deck Section in a Wind Tunnel., 9th IBCAST, Islamabad, Islamabad, (2011), pp. ,
160 T Bano, N A Sheikh, S. Manzoor, S. Khushnood, Numerical Simulation of Flow past a Square Cylinder, 9th IBCAST, Islamabad, Islamabad, (2011), pp. ,
161 M A R Abid, M I Sarwar, A Tahir, M A Khan, M Shehryar, S M Shah, , Gas Turbine Blade Flow Analysis Comparison using CFD and Wind Tunnel, 9th IBCAST, Islamabad, Islamabad, (2011), pp. ,
162 X. Amandolèse, P. Hémon, S. Manzoor, Transient Temporal Response of a Flexible Bridge Deck Submitted to a Single Gust, 5th International Conference on Advanced Computational Methods in Engineering (ACOMEN – 2011), , (2011), pp. ,
163 Muzaffar Ali , Vladimir Vukovic, Mukhtar Hussain Sahir , Guiliano Fontella, Energy analysis of chilled water system configurations using simulation-based optimization, Energy and Buildings, Vol. 59, (2013), pp. 111-122
164 Muzaffar Ali , Vladimir Vukovic, Mukhtar Hussain Sahir , Daniele Basciotti, Development and validation of a desiccant wheel model calibrated under transient operating conditions, Applied Thermal Engineering, Vol. 61, (2013), pp. 469-480
165 Muhammad Anser BASHIR1, Hafiz Muhammad ALI, Muzaffar ALI1 and Aysha Maryam SIDDIQUI2, An experimental investigation of performance of photovoltaic modules in Pakistan, Thermal Science International Journal, (2013), pp. 134-134
166 Muzaffar Ali, Vladimir Vukovic, Automated optimization of HVAC system configurations, 41st International Conference on HVAC&R, Belgrade,Serbia, December 1-3, 2010 (2010), pp. ,
167 Muzaffar Ali, Vladimir Vukovic, HVAC system configurations, Energy Conference, June 2010, Vienna, Austria., (2010), pp. ,
168 Muzaffar Ali, Vladimir Vukovic, Performance investigation of desiccant wheel, Energy Conference,, Vienna, Austria., July 2011 (2011), pp. ,
169 MUDASERULLAH, R. A. PASHA, R.A. RAHMAN and W. ASGHAR, FATIGUE LIFE ESTIMATION OF DIFFERENT WELDING ZONES OF OXY ACETYLENE WELDED ALUMINUM ALLOY (AA 5052-H32), Department of Mechanical Engineering, University of Engineering and Technology, Taxila, Pakistan, No. 3, (2013), pp. 261-265
170 Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, 2. Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading., Life Science Journal 2013, (2013), pp.
171 ali NASIR, Zaffar KHAN, Saad NAUMAN, Saad ANAS, Asim PASHA, Moin AHMAD, Shahid KHALIL, Masood SHAH, Mudaser ULLAH,Rana ATTA, M.SHAHID, Experimental Based Tensile Strength Variability of Multilayered Composites, Fabricated via. Optimized “VARTM” Technology, 1. Department of Mechanical and Aeronautical Engineering, University of Engineering and Technology, Taxila, Pakistan, (2013), pp.
172 R.A. Jabbar, S.A. Qureshi, M. Akmal, W.A. Qureshi, and A. Ahmad, Practical Analysis and Mathematical Modeling of Harmonic Distortions Caused by Electronic Loads, Proceedings of the Seventh IASTED International Conference, Power and Energy Systems, Palma de Mallorca, Spain, 29/08/2007 (2007), pp. PP 151-156,
173 Muhammad Ammar Mehdi, Nabi Ahmed, Tanzeel ur Rashid, Six Sigma Implementation In A Manufacturing Organization, Technical Journal, University of Engineering and Technology Taxila, (2007), pp. 58-63
174 Muhammad Ammar Mehdi, Tanzeel ur Rashid, Lean Six Sigma: An Overview for developing countries, POM-2006, Shangahi,China, (2006), pp. ,
175 Waqas Anwar, Nazeer Ahmad Anjum, Usage of Crack Growth Prediction Software Codes for Life Assessment of Aerospace Structures, FEMS, UET Taxila, 22 - 23 Oct (2007), pp. 198-204, UET Taxila
176 Waqas Anwar, Dr. M. Zubair Khan, Nazeer Ahmad Anjum, Monitoring of Crack Growth Behavior in Aerospace Grade Materials Using Notched Specimen, IBCAST, NCP Islamabad, (2008), pp. , IBCAST
177 Ghulam Mustafa,Jin Ho Kim,Nazeer Ahmed Anjum, Structural Design and Optimization of 7.5MW Wind Turbine Blade under Fatigue Loading, IBCAST, NCP Islamabad, January 11th – 14th (2010), pp. 17-22, IBCAST
178 Rana Atta-ur-Rahman, M. Ali Nasir, Mudaser Ullah, Riffat Asim Pasha, Nazeer Ahmad Anjum, Shahid Mehmood, M. Muddassar, Ilyas Farooqi, Waqas Asghar, M.Imran, Demarcation of Fatigue Crack Cumulative Damage (Initiation + stage I) of Aluminum Alloy under Combined Loading, Life Science, (2014), pp. 1-6
179 Muzaffar Ali, Vladimir Vukovic, Mukhtar Hussain Sahir, Giuliano Fontanella, Energy analysis of chilled water system configurations using simulation-based optimization, Energy and Buildings, Vol. 59, (2013), pp. 111-122
180 Muzaffar Ali ,Vladimir Vukovic , Mukhtar Hussain Sahir , Daniele Basciotti, Development and validation of a desiccant wheel model calibrated under transient operating conditions, Applied Thermal Engineering, Vol. 61, (2013), pp. 469-480
181 Bashir Muhammad Anser, Ali Hafiz Muhammad, Ali Muzaffar, Siddiqui Aysha Maryam, An experimental investigation of performance of photovoltaic modules in Pakistan, Thermal Science International Journal, (2013), pp. 134
182 Sana Zulfiqar, Asif Israr, Ilyas A. Huqqani, An Approximate Solution Technique of Nonlinear Vibration of Partially Cracked Plates Using Higher Order Perturbation Method, 2nd International Conference on Aerospace Science & Engineering (ICASE), Institute of Space Technology, Islamabad, Dec. 28-30, 2011 (2011), pp. ,
183 Amir Sultan, Riffat Asim Pasha, Masood ur Rehman, M.Zubair Khan, M. Afzal Khan,Naeem Ullah Dar,, Numerical simulation and experimental verification of CMOD in SE(T) specimen: Application on FCGR of welded tool steel, Acta Metall. Sin. (Engl. Lett.), Vol. 26, No. 1, (2013), pp. 92-96
184 A. T. Jarral M.Ali ,M.H Sahir,R.A Pasha, Design Optimization And Analysis of Vertical Axis Wind Turbine Blade, The Nucleus, Vol. 50, No. 1, (2013), pp. 7-12
185 A. T. Jarral ,R.A Pasha,, Measurement and Supperssion of cutting tool vibration Using Piezoelectric ceramic in ANSYS, The Nucleus, Vol. 50, No. 2, (2013), pp. 149-153
186 A.Hameed, R.A Pasha, A.R. Khan, M.Z.Khan and M.Shah,, To investigate the Effect of heat treatment on fracture toughness of welded joints, The Nucleus, Vol. 50, No. 2, (2013), pp. 165-172
187 Mudassar Ullah, R.A Pasha, R.A.Rahman, W.Asghar, Fatigue Life Estimation of different Welding Zones of Oxy Acetylene Welded Aluminum Alloy (AA 5052-H32), The Nucleus, Vol. 50, No. 3, (2013), pp.
188 Ambreen Tajammal Jarral, Riffat Asim Pasha, Chatter Measurement on Turning Cutting Tool using Piezoelectric Ceramic Material, Technical journal UET Taxila, Vol. 18, (2013), pp. 60-65
189 Muhammad Anser BASHIR, Hafiz Muhammad ALI, Shahid Khalil, Muzaffar ALI, and Aysha Maryam SIDDIQUI, Comparison of Performance Measurements of Photovoltaic Modules during Winter Months in Taxila, Pakistan, International Journal of Photoenergy, (2014), pp.
190 Ali, H.M, Mahmood, M, Bashir, Muzaffar Ali, M. and Siddiqui, A.M., Outdoor Testing of Photovoltaic Modules during Summer in Taxila, Pakistan, Thermal Science International Scientific Journal, (2014), pp.

To access members area, please Login or Register

Navigation